How to Check Fitting of Body Protectors?

The effectiveness of a Body Protector depends on the correct one for the job being chosen, and on ensuring that the fit of the garment is correct. Body protectors offer some protection from impacts suffered as a consequence of falling from a motorcycle.Injuries cannot be entirely prevented by any protective clothing but should be reduced in severity.

How to select the correct size?

Begin by taking the following measurements:(See Diagram & Size Chart below)
• Waist
• Chest
• Waist to waist (taking the tape measure from the front waist, up over the chest and shoulder and down the back to the waist).
Use the size chart in the user instructions (attached to all new BETA Standard garments) to find the correct size. If the measurements are at the top or bottom of a size range, try to find the two closest sizes to establish which is more comfortable.
Manufacturers offer a special sizes service or even made-to-measure body protectors. If one cannot be found that fits and is comfortable, it is possible to order one that will fit and is comfortable.

Points to check on fitting:

The body protector should be tried on over light clothing. Check that is comfortable to wear in all simulated riding positions. The garment should fit securely and reasonably tightly to avoid movement during activity and to ensure that it is in place in the event of an accident.

Put on the selected body protector. Adjust it to a snug fit. Use the shoulder closures to make fine adjustments to the fit around the shoulders. Do up the second flap of the shoulder closure. Pull the waist flaps of the back panel forward and press them onto the Velcro of the front panel.

Tighten one then the other to get a tight fit. Adjust the length of the waist strap and do it up. Ensure that all hooks fastening at each closure is in contact with loop material. Check the overall fit is snug, and that no RED VELCRO is exposed. If it is the protector is too small. Try the next larger size.

Women may find the use of a larger size of front panel than back panel enables a more comfortable fit to be achieved.

Panels from adjacent sizes are compatibleIn garments where the shoulder protector is separate; you may find that the garment can be adjusted at the shoulder.


Dimension A: Chest girth
DimensionB: Waist girth
Dimension C: Waist to waist length measured over the shoulder



SHOULDER PROTECTORS (SP's)
Riders often suffer injuries to other parts of the body when falling on the shoulder. The new Standard is designed to test against a fall on the point of the shoulder which is stronger than the rib cage and a different shape. It is a separate Standard for that reason. BP's may incorporate a SP as an integral part of the garment, but the SP will still be subject to a different test. Where Shoulder Protectors are an integral part of the garment, they should never be removed as by doing so the benefits of the garment are substantially reduced.

Regards,

Motorbike Clothing-Motorcycle Suits-Motorbike Jackets

Padana Garments are dedicated to provide fantastic range of Motorbike Clothing. With over 25 years in the motorcycle industry, we have a keen eye for sourcing only the highest quality Leather Motorbike Clothing products for our customers. Huge range of Motorbike clothing such as Motorbike Leather Clothing including motorbike leather suits, jackets, motorbike leather gloves, textile gloves, motorbike leather ladies jackets, leather pants, Textile long and short jackets, motocross wears, motorbike leather accessories and so on. We are constantly innovating professional Motorbike Clothes for the bikers to meet their riding needs

Please visit vedio of Padana Garments at http://www.youtube.com/watch?v=ihDkzULR3E4





Regards,

Padana Fashion Garments-Textile Fashion Jackets

A classic sports look with the modern technical features you expect from Padana Garments. Our Whole range of Textile Clothing like Textile Jackets, textile long jackets, Men's Textile Jackets are available in several high technology materials. Innovative solutions have been applied to our Motorbike apparel for the best comfort on long journeys and great adventures on the world’s roads.

Texile Long & Short Jackets:


Features:
> Zipped vented front and back
> Ventilation on sleeves with water resistant zips
> Outside pockets
> Fully adjustable collar reinforced in “skin peach”
> Full removable polar fleece lining
> Easy access to inside pockets with or without winter liner fitted
> Adjustable collar, sleeves, waist and cuff
> CE armor on elbows and shoulders, Front closure with buttons and zip
> Waterproof and breathable membrane
> Internal storm flap system
> 100% waterproof breathable Rainguard liner
> Comfort neck roll


Textile Motorcycle Pants:
Waterproof Cordur Motorcycle Pants with CE is Weapons Grade Riding Gear.Go ahead, road. Take your best shot.

Features:
> Dual Adjustment Waist Belts
> Zippered Hand Pockets
> Removable Waterproof liner
> Removable EverHeat Thermoliner
> Stretch Kevlar and Power-Stretch Panels for strength and mobility
> Anotomical Leather Knee Pre-Curved and Padded
> Full Leather Saddle for wear resistanceNightViz Panel to be seen at night

Textile Gloves-Textile Motorcycle Ridng Gloves:
Waterproof Motorcycle Riding Gloves, Textile Motorcycle Gloves, Mens Textile Gloves. Keep your hands dry during the nastiest of downpours. Made Of Polyester Nylon Duratex with Dynax Polyester Lining. Velcro Strap for custom fit.

Regards,

Manufacturing Process of Motorbike Leather Clothing

We aim to bring you the best products.To accomplish this goal, many processes have been streamlined and improved. The creativity of our team and the understanding of the latest trends in fashion have helped us immensely to come up with unique designs. All manufacturing facilities have been extensively redesigned and reconfigured to improve productivity, material flow, product quality and the environment. The future, strengthening and growth of company depend on the satisfaction of our customers by the quality of our products. Therefore, our main objective is to be a leading company in the sector of Leather Garments, which is always open to innovations and widely known by the high quality of its products.

Manufacturing Process:



Design & pattern:
Our competence in design and innovation is an important element of our market leadership worldwide. Our professional pattern masters and designer prepare the latest design and also create innovative style according to the latest trends and as per special demands of our customers.


Sampling: Our Designers and sampling department always try to create best design to satisfy our customer and to keep ourselves updated. We continuously watch international fashion market in order to provide you the latest deisgn. We can also make deisgn upon your detailed specifications.



Cutting Department: All leathers are being assorted according to their color tones and looks, before cutting in order to maintain same touch, look and feel of the finished garment.







Production Floor: Our production department which is fully equipped with latest technology. We are conducting aggressive research and development in the areas of information collection, modernization of garment designing, use of new and better imported accessories, improvement in quality and innovating new leather qualities.


Quality Control: Working with TQM (Total Quality Management) principles we will equip each of our personnel with the knowledge and resources required to successfully contribute towards our on-going search for excellence. All of our products check strictly under quality control department.


Finishing: Finished garments are passed after stringent quality check by our well trained checkers. Our competence in design and innovation is an important element of our market leadership worldwide. It creates significant opportunities with our customers, especially with our new R&D Centers in Lahore – Pakistan that further qualifies Padana Garments as a supplier of premium automotive leather.




Regards,

Introduction of Padana Garments

PADANA was founded in 1982 by its current CEO Mr.Muhammad Bashir Padana and started as a manufacturer of motorcycle gloves. In inception it only manufactured gloves but after some years an evolution came out to make motorcycle clothing too.

Now PADANA has become the professional leading manufacturers of all type of Motorbike clothing. We manufactured and Export all type of Motorbike Leather Clothing including motorbike leather suits, Leather Jackets, motorbike leather gloves, textile gloves, motorbike leather ladies jackets, leather pants, Textile long and Short jackets, motocross wears, motorbike leather accessories and so on. We are constantly innovating professional Motorbike Clothes for the bikers to meet their riding needs.

The success behind PADANA is that it believes to be a capital intensive company and it has been upgrading its technology day by day and improving its employee’s skills by training, and regular re-evolution of its quality control and assurance system. Our vision is to become the leader and trendsetter in Motorbike Leather Clothing industry. PADANA team is continuously providing excellent and prompt services and is always ready to hear & help out its client by hearing their requirements. We encourage you to appraise us and we are positive that we will not only meet your expectations but exceed them as well. We hope to serve company as prestigious as yours and enter a sincere long term relationship with you .


Regards,